Girder Bridge Fabrication
RDSO-registered fabrication of steel bridge girders for railway and highway projects, from drawing review and plate cutting to trial assembly, coating and dispatch.

- RDSO scope
- Composite & plate girders
- Listed validity to 31 January 2031
- Largest recent span
- 30.5 m
- Open web girder, NTPC Lara
- Annual capacity
- 18,000–20,000 MT
- Surface protection
- Blast · metalize · paint
- To project specification
Bridge girders made to drawing
Kothari Chemicals (Engineering Division) fabricates bridge girders for railway and highway infrastructure projects across India. The works holds an RDSO registration for open web, composite and other steel plate girders, and has supplied railway girder packages to EPC contractors and public-sector clients.
The bridge girder fabrication facility at Hathkhoj, Bhilai combines CNC profile cutting, drilling, welding and straightening with blasting, metalizing and painting, so a girder moves from plate to dispatch within one controlled workflow.
From drawing review to dispatch, our scope covers plate, box and composite girders, with fit-up, camber and inspection requirements set by the project. You can review our completed girder projects or check the RDSO registration scope for tender enquiries.
Bridge Girder Fabrication in India: Scope, Process and Capacity
Read the full guide
Kothari Chemicals (Engineering Division) provides bridge girder fabrication for railway and road bridges from its works in Bhilai, Chhattisgarh. We make composite girders, steel plate girders, open-web girders and foot-over-bridge girders. Our RDSO registration (ID CBS/G/Reg/Kothari Chemicals) covers open web, composite and other steel plate girders. Stated capacity is 18,000 to 20,000 metric tonnes a year, with single-piece handling up to 140 MT.
Request a quote with your drawings
What we fabricate
Our girder scope covers:
- Composite girders, with studs where the drawings call for them
- Steel plate girders
- Open-web girders, including riveted connections
- Road-over-bridge (ROB) and foot-over-bridge (FOB) girders
- Railway bridge members, including steel truss and plate girders
Plate, composite and open-web girders differ in span, weight, cost driver and inspection needs. The plate girder vs composite girder vs open-web girder guide compares them for buyers.
The RDSO registration covers open web, composite and other steel plate girders, including road-over-bridge and foot-over-bridge girders. The RDSO-approved bridge fabrication page sets out the registration details, and how to verify RDSO vendor registration for a girder tender explains the check.
How a girder moves through the works
- Design review. We check drawings, revisions, the bill of quantities, governing standards, inspection stages, delivery boundary and schedule before production starts. The delivery workflow from design review to dispatch covers this stage in detail.
- Material. Steel is procured to the specified grade. Material test certificates and traceability are kept where the contract requires them. See steel plate traceability and mill test certificates.
- Cutting and preparation. CNC plasma profile cutting, CNC three-axis drilling and sawing, bevel preparation, and hydraulic shearing and punching.
- Fit-up and welding. Members are fitted and welded on automatic H-beam welding lines and by MIG/MAG, TIG, submerged-arc and stud welding. Riveting is available for open-web work. Welding follows approved procedures. See WPS, PQR and welder qualification.
- Straightening and trial assembly. Hydraulic straightening corrects distortion. Where the contract requires it, we trial-assemble the girder to check camber and dimensions before release. See trial assembly, camber and dimensional control.
- Surface protection. Automatic shot blasting, a blast room, a paint booth and metalizing equipment are used. Cleanliness, surface profile, coating system and dry-film thickness follow the project specification. Our dry-film thickness report guide explains how to read the record.
- Packing and dispatch. Members are marked, protected and sequenced for loading. Long members get a route survey, transport permits and a lifting plan before release. See long steel girder transport and dispatch planning.
Quality and inspection
Dimensional and visual checks, dye penetrant testing (DPT), magnetic particle inspection (MPI), ultrasonic testing (UT) and radiography (RT) are done in house, as is stress relieving. Phased-array ultrasonic testing (PAUT) and laboratory tests are arranged through qualified external support when the inspection and test plan calls for them, including NABL-accredited laboratories. The extent of testing, the technique and the acceptance criteria are set by the approved inspection and test plan and the contract.
Our quality system is ISO 9001:2015, certificate 305026010110Q issued by QRO Certification LLP. The certificate is dated 1 January 2026, expires 31 December 2028, and its scope covers bridges and girders. The quality control guide for steel fabrication explains how the checks fit together.
Depending on the contract, a job can be supplied with material certificates, traceability records, WPS/PQR and welder qualifications, dimensional reports, NDT reports, calibration records, coating reports, non-conformance closure, inspection release notes, packing lists and a manufacturing record book.
Welders and welding inspectors hold BHEL Welding Research Institute certificates. Personnel qualification and validity are confirmed for each contract.
Governing standards and steel grade
The buyer defines the governing documents for each girder: IRS, RDSO, IRC, IS or other contract requirements, with their revisions. The buyer or designer also states the steel grade, welding and NDT extent, coating, inspection authority and dispatch splits. Common Indian structural-steel enquiries reference IS 2062 grades, but the exact grade, sub-grade and any impact requirement must be stated in the enquiry. Understanding bridge girder fabrication in India covers the standards in more detail.
Capacity and handling
- Annual fabrication capacity: 18,000 to 20,000 metric tonnes per year
- Single-piece handling: up to 140 metric tonnes
These are maximum stated capabilities, not open production slots. Production load, crane set-up (the works has multiple 50 T cranes) and logistics are confirmed for each package. Each lift is reviewed for geometry, centre of gravity, rigging, travel path and available resources. The works cover layout and marking, fabrication bays, assembly, stacking, shot blasting, metalizing, painting and dispatch support. For more on handling limits, read single-piece handling capacity in heavy steel fabrication.
Girder projects
Recent girder work in our executed-work register includes:
- NTPC Lara: 250 MT, ten 30.5 m open-web spans, including rivets. See the NTPC Lara open-web girder case study.
- MCVL-Handidua: 210 MT, four 36 m railway composite-girder spans.
- Pasan-Gevra-Pendea: 229 MT, three 24 m composite-girder spans.
- Kusmunda, Chhattisgarh: 195 MT, a 24 m road-over-bridge, including studs and painting.
- NTPC Tamnar: 96 MT, two 24 m composite-girder spans to an RDSO drawing.
- Kapan station, Odisha: 50 MT of FOB girders, including fabrication, blasting, metalizing, painting and supply to site.
Our largest recent programme was 10,000 MT of heavy fabrication for BHEL Trichy in FY 2025-26. Those were heavy steel components rather than girders. See heavy steel fabrication for that work. The full list of completed work is on the projects page.
What to send with an enquiry
A girder quotation is only comparable when the inputs are complete. Send:
- drawings with the revision register
- bill of quantities
- steel grade and governing codes
- welding and NDT requirements, and the inspection agency
- coating specification
- trial-assembly requirement
- delivery location, dispatch splits and site constraints
There is no universal lead time. It depends on engineering release, steel availability, member complexity, welding and NDT scope, coating, inspection hold points, transport permissions and current production load. A committed programme follows review of the full RFQ. The steel fabrication RFQ checklist lists the inputs in more detail.
Request a quote for girder fabrication
Kothari Chemicals (Engineering Division) Plot No. 3, Heavy Industrial Area, Hathkhoj, Bhilai - 490026, Chhattisgarh, India Landline: +91 788 2974 016 | Mobile: +91 93022 91000 | Email: [email protected]
Frequently asked questions
Is Kothari Chemicals RDSO-approved for girders?
Yes. Kothari Chemicals, the legal entity named in the registration, holds RDSO registration CBS/G/Reg/Kothari Chemicals for open web, composite and other steel plate girders. The listed validity runs through 31 January 2031. Check the current status and category on the IREPS portal under Approval of Vendors (UVAM) before you bid. Registration details are on the RDSO-approved bridge fabrication page.
What is the longest girder you can make?
The stated single-piece handling limit is 140 MT, using multiple 50 T cranes. Recent completed spans include 36 m railway composite-girder spans and 30.5 m open-web spans. The maximum length for your job depends on member weight, transport route and lifting plan, which we review for each package.
How do you ship long girders?
Long members are dispatched to the delivery boundary in the contract. Before release we plan member dimensions, weight, loading sequence, route survey, transport permits, lifting points, support design and site readiness. See long steel girder transport and dispatch planning.
Which NDT methods do you carry out?
Dimensional checks, visual examination, dye penetrant testing (DPT), magnetic particle inspection (MPI), ultrasonic testing (UT) and radiography (RT) are done in house, as is stress relieving. PAUT is arranged through qualified external agencies when specified. The extent, technique and acceptance criteria follow the approved inspection and test plan and the contract.
Do you provide the design?
Design responsibility is set for each package. We review drawings for manufacturability as part of the standard workflow, but that does not by itself make Kothari Chemicals the engineer of record. Confirm the design scope in the enquiry.
What the girder scope covers.
- 01
Railway bridge girders
Fabrication of railway bridge girders within the RDSO-registered scope, to Indian Railways drawings and specifications.
- 02
Road and highway bridge components
Steel girders and members for road over bridges, flyovers and highway crossings to project drawings.
- 03
Inspection and traceability
Dimensional verification, documented inspection and material test certificate traceability, with NDT to the project QAP.
- 04
RDSO registration
Registered with the Research Designs & Standards Organisation for open web, composite and other steel plate girders.
Girder types and specifications.
Railway girders
- Plate girders (open web and closed web)
- Box girders
- Through type girders
- Deck type girders
- Composite steel-concrete girders
Highway girders
- I-girders
- Box girders
- Continuous girders
- Simply supported girders
Standards and documentation.
The governing standards and inspection stages are fixed by the contract, approved drawings and quality assurance plan for each package.
| Reference | Application |
|---|---|
| RDSO specifications | Railway bridge girders |
| IRC codes | Highway bridges |
| IS 800 | Code of practice for general construction in steel |
| IS 2062 | Hot-rolled steel for general structural purposes |
| ISO 9001:2015 | Quality management, certificate 305026010110Q |
| NDT | As specified in the project QAP; specialist methods through approved agencies |
| Material certificates | Mill test certificates retained for traceability |
Our manufacturing process.
01
Design & engineering
Drawing review, material selection and fabrication drawing preparation to the project specifications and applicable codes.
02
Precision fabrication
CNC cutting, forming, fit-up and welding by qualified welders to approved welding procedures, with stage inspection.
03
Testing & dispatch
NDT and dimensional verification to the QAP, protective coating, then marking and packing for safe transport to site.
Discuss your bridge girder requirements.
Send the GAD, fabrication drawings, span details and inspection requirements. We will confirm scope, inspection stages and a delivery schedule.
- Works & sales
- +91 788 2974 016
- Hours
- Mon–Sat, 9:00–18:00 IST
- Works
- Plot No. 3, Heavy Industrial Area, Hathkhoj, Bhilai 490026, Chhattisgarh, India